Etc Desire Series v1.6.0 User Manual Manual de usuario descargar pdf (Pagina 32)

26 Desire Series v1.6.0 User Manual

Power and Data Cabling Requirements

Power

The Desire series fixture operates on AC power, 100 to 240VAC/50-60Hz. The fixture must

be connected to a non-dimmable power source in order to avoid damage to its internal

power supply and other electrical components.

Data (D40, D40XT, D60)

The Desire series fixtures operate on a DMX control signal or as standalone fixtures. The

fixture is supplied with a 5-pin XLR DMX input connector and a 5-pin DMX Thru connector.

DMX cables should be acceptable for DMX data transmission (not microphone cable) and

should follow the standard pinout. The optional secondary data pair is not used by the

Desire series fixtures. The maximum DMX data run from any DMX source to the last fixture

in a chain is 1000 feet (300m). Termination is required for the D40XT in the data thru port

of the last fixture in each data chain. The D40 and D60 are self-terminated.

See DMX Profile, page 31 for additional information on DMX addressing of Desire Series

fixtures.

Mains Europe North America

Line Brown Black

Neutral Blue White

Ground (Earth) Green/Yellow Green

DMX512 pinout for five-pin XLR female

1 Common (Shield)

2 Data –

3 Data +

4 not connected

5 not connected

Push

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 99 100

Sin comentarios

Etc Desire Series v1.6.0 User Manual Manual de usuario Pagina 32