ETC Source Four LED Series Manual de usuario descargar pdf (Pagina 66)

61 Source Four LED Profile v1.4.0 User Manual

A Rate of 100% represents running the Sequence with timing exactly as specified within

the Presets. A Rate above 100% represents running the Sequence with faster timing than

specified within the Presets. For example, with a Rate of 200%, a Preset with a Fade Time

of 6 seconds would actually be run within the Sequence in only 3 seconds.

A Rate below 100% represents running the Sequence with slower timing than specified

within the Presets. For example, with a Rate of 50%, a Preset with a Fade Time of 6

seconds would actually be run within the Sequence in 12 seconds.

Any change to the Rate is updated live in the fixture memory. Pressing [Back] does not

undo a change to Rate.

Step 1: On the Sequences menu, scroll to Rate and press [Enter].

Figure-3.24 Selecting Rate on the Sequences Menu.

Step 2: Press [Up] or [Down] to set the desired percent.

Step 3: Press [Enter].

Step 4: Press [Down] to scroll to Step.

Step

You enter the number of the step in the sequence to be edited. In our example, you select

step 1. After setting the Preset and Link time, return to Step and select step 2. Repeat this

process until you have entered all the steps in the sequence.

Any change to Step is updated live in the fixture memory. Pressing [Back] does not undo

a change to Step.

Step 1: On the Sequences menu, scroll to Step and press [Enter].

Figure-3.25 Selecting Step on the Sequences Menu.

Step 2: Press [Up] or [Down] to set the desired Step number.

Step 3: Press [Enter].

Step 4: Press [Down] to scroll to Preset.

Sequences

Sequence: * 3

Status: Active

Rate: 100%

Step: 01

Preset: 1

Link Time: 00:02

Copy to Other Fixture