ETC Source Four LED Series Manual de usuario descargar pdf (Pagina 26)

21 Source Four LED Profile v1.4.0 User Manual

Accessory Slot

Figure-1.7 Accessory slot

The accessory slot is located on the top of the shutter barrel and in front of the pattern holder slot.

It accommodates either a drop-in iris or a motorized pattern device. When the slot is not in use, a

small sheet metal cover secured with two Phillips screws prevents light leakage.

Step 1: Use a Phillips screwdriver to loosen the screws on the drop-in iris slot cover. Do

not remove screws.

Step 2: Slide the cover completely forward to expose the slot.

Step 3: Insert the iris or motorized pattern device. For an iris, install the flat side toward

the shutters and make sure the iris handle extends from the slot.

Step 4: Slide the slot cover back toward the shutters until it meets the iris handle. Leave

enough space to move the iris handle.

Step 5: Secure the accessory slot cover by tightening the screws.

Rotating the Shutter Barrel Assembly

Figure-1.8 Rotating the shutter barrel assembly

Step 1: Loosen the shutter barrel rotation knob directly behind the shutters on the

underside of the reflector housing. Do not remove the barrel rotation knob.

Step 2: Rotate the shutter barrel to the desired position (up to 25° in either direction from

the centered position).

Step 3: Once the shutter barrel is positioned, tighten it’s rotation knob to lock it in place.

Accessory slot

Iris

Barrel rotation knob

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 95 96

Sin comentarios

ETC Source Four LED Series Manual de usuario Pagina 26