Etc Source Four XT HID Zoom User Manual Manual de usuario descargar pdf (Pagina 10)

8 Source Four XT HID Zoom User Manual

To install the barrel:

Step 1: Slide the barrel down over the lens rails, aligning the three ridges of the barrel with the

ridges of the housing.

Figure-6 Barrel Installation.

Step 2: Tighten the three 4mm hex screws around the barrel.

• Partially tighten each screw, working progressively around the barrel until all have

been tightened to 25in-lbs (2.82 Nm). DO NOT OVERTIGHTEN.

• The nylon washer should be tightly sandwiched between the two flanges at each

screw connection.

Barrel ridges

4mm hex

screws (x3)

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Sin comentarios

Etc Source Four XT HID Zoom User Manual Manual de usuario Pagina 10