Etc Source Four LED v1.6.0 User Manual Manual de usuario Pagina 44
- Pagina / 100
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
38 Source Four LED Profile v1.6.0 User Manual
Home Screen Displays
Depending on the fixture settings, the following are displayed in the system message area
on the respective home (status) screens.
Lustr+, Series 2 Lustr, and Studio HD
Daylight and Tungsten
Profile Lustr+, Series 2 Lustr, and Studio HD
The control profile defines the number and control parameter assignments of input
channels for intensity and color-control. For more information, see Profiles, page 24.
Profile (Daylight and Tungsten)
The control profile for Daylight and Tungsten includes only the Direct or Studio options. The
first channel of DMX control adjusts fixture Intensity from 0 to 100%. For more information,
see Daylight and Tungsten Profiles, page 28.
Output Setting
Output is the way and amount to which the fixture constrains the overall power going to the
LED array, which determines how consistent the fixture’s brightness may be. For more
information, see Output, page 46.
Dimming Curve
Dimming curve is the way that the fixture responds to changes in the control signal for
overall intensity. For more information, see Curve, page 47
Red Shift
Red shift replicates the warming of an incandescent filament’s color temperature change
as it dims. For more information, see Red Shift, page 49.
Strobe
Strobe flashes the output of the LED array. For more information, see Strobe, page 43.
Parameter Stage XT Arch High Impact Studio General
Profile HSI HSI RGB Studio
Direct Control
(Dir)
Output Setting
Regulated
(Reg)
Protected
(Prt)
Boost
(Bst)
Regulated
(Reg)
Regulated
(Reg)
Dimming Curve
Incandescent
(Incd)
Standard
(Stnd)
Quick
(Qik)
Linear
(Lin)
Standard
(Std)
Red Shift (RS) Enabled Disabled Disabled Disabled Disabled
Strobe (Str) On On On On On
Parameter Studio Stage Single Channel
Profile Studio Direct Direct
Output Setting Regulated (Reg) Regulated (Reg) Regulated (Reg)
Dimming Curve Linear (Lin) Incandescent (Incd) Standard (Std)
Strobe (Str) On On Off
Fan Control DMX DMX Automatic (Auto)
- User Manual 1
- Table of Contents 3
- Chapter 2 4
- Chapter 3 4
- Appendix A 5
- Appendix B 5
- Introduction 7
- Daylight and Tungsten 8
- Fixture Components 9
- Applications 10
- Document Conventions 10
- WARNING: 11
- Contacts 12
- Chapter 1 13
- Specifications 14
- Typical Power Consumption 15
- Note About LED Fixtures 16
- Hardware 17
- Install Lens Tube 18
- Aim Adjustments 19
- Focusing the Beam 20
- Shaping the Beam 20
- Soft Focus Diffuser 21
- CAUTION: 23
- Adjusting the Yoke Position 24
- Installation Clearances 25
- Safety Cable 27
- Fixture Weight 27
- Connections 29
- DMX Profile 30
- Color Mixes 31
- HSI and HSIC: 31
- Color Matching 33
- Direct Control 34
- Fan Control 34
- Tungsten and Daylight 35
- Installing Accessories 36
- Basic Menu Navigation 37
- User Interface Overview 38
- 2 Basic Menu Navigation 33 39
- Keypad Lockout 39
- Lustr+ screen shown 40
- Display Title 41
- Input Settings 41
- DMX Address 41
- Menu Navigation 42
- Operation 43
- Home Screen Displays 44
- 3 Operation 39 45
- Main Menu 46
- Operation 41 47
- Advanced Menu 48
- Data Loss 50
- HLL-2Min 50
- HLL-4ever 50
- Using Plus Seven Control 51
- Regulated 52
- Protected 52
- Standard 53
- Incandescent 53
- Output Freq 55
- Red Shift 55
- Operation 51 57
- Fade Time 58
- Delay Time 58
- []. To discard 59
- Edit (Daylight and Tungsten) 60
- Copy to Other Fixtures 60
- Save DMX as Preset 61
- Sequences 62
- Operation 57 63
- Link Time 64
- Finishing the Sequence 64
- Master/Slave Operation 66
- Current DMX In 67
- Network Statistics 68
- Operation 63 69
- Individual Control (Ind Cntl) 70
- Recalibrate Fixture 71
- About Fixture 71
- Backlight 72
- BLght time out 72
- Language 73
- Status Indicators 73
- Operation 69 75
- Studio Settings 76
- 3 Operation 71 77
- Studio DMX Control 78
- Error Messages 79
- Software Updates 80
- Routine Maintenance 81
- Quick Start 83
- Configure 84
- Quick Setups Menu 85
- Studio Quick Setup 86
- Advanced Settings 86
- Menu Flow Chart 87
- System OK 88
- Menu Flow Chart 83 89
- Menu Flow Chart 85 91
- Press the Light Bulb button 93
- Lustr+ and Studio HD xtures 93
- To Te s t 94
- To Recalibrate 94
- Menu Flow Chart 89 95
- B Menu Flow Chart 91 97
Relacionado con productos y manuales para Encendiendo Etc Source Four LED v1.6.0 User Manual
(1 paginas)
(100 paginas)
(7 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.082 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales